[BUG][BYT][I2S] Nothing can be recorded when used "arecord -Dhw:0,0 -r48000 -c2 -fs16_le s30.wav -vvv -i" to record

[Liviali155]

Describe the bug
Nothing can be recorded when used "arecord -Dhw:0,0 -r48000 -c2 -fs16_le s30.wav -vvv -i" to record

To Reproduce

1. sudo reboot
2. arecord -Dhw:0,0 -r48000 -c2 -fs16_le s30.wav -vvv -i -d 10

ubuntu@cd-byt-mb-rt5682-07:~$ arecord -Dhw:0,0 -r48000 -c2 -fs16_le s30.wav -vvv -i
Recording WAVE 's30.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
Hardware PCM card 0 'sof-rt5682' device 0 subdevice 0
Its setup is:
  stream       : CAPTURE
  access       : RW_INTERLEAVED
  format       : S16_LE
  subformat    : STD
  channels     : 2
  rate         : 48000
  exact rate   : 48000 (48000/1)
  msbits       : 16
  buffer_size  : 16320
  period_size  : 4080
  period_time  : 85000
  tstamp_mode  : NONE
  tstamp_type  : MONOTONIC
  period_step  : 1
  avail_min    : 4080
  period_event : 0
  start_threshold  : 1
  stop_threshold   : 16320
  silence_threshold: 0
  silence_size : 0
  boundary     : 9187343239835811840
  appl_ptr     : 0
  hw_ptr       : 0
Max peak (8160 samples): 0x00000000 #                    0%
Max peak (8160 samples): 0x00000000 #                    0%
Max peak (8160 samples): 0x00000000 #                    0%
Max peak (8160 samples): 0x00000000 #                    0%
Max peak (8160 samples): 0x00000000 #                    0%
Max peak (8160 samples): 0x00000000 #                    0%
Max peak (8160 samples): 0x00000000 #                    0%
Max peak (8160 samples): 0x00000000 #                    0%
Max peak (8160 samples): 0x00000000 #                    0%
Max peak (8160 samples): 0x00000000 #                    0%
Max peak (8160 samples): 0x00000000 #                    0%
Max peak (8160 samples): 0x00000000 #                    0%
Max peak (8160 samples): 0x00000000 #                    0%
Max peak (8160 samples): 0x00000000 #                    0%
Max peak (8160 samples): 0x00000000 #                    0%
Max peak (8160 samples): 0x00000000 #                    0%
Max peak (8160 samples): 0x00000000 #                    0%
Max peak (8160 samples): 0x00000000 #                    0%
Max peak (8160 samples): 0x00000000 #                    0%
Max peak (8160 samples): 0x00000000 #                    0%
Max peak (8160 samples): 0x00000000 #                    0%
Max peak (8160 samples): 0x00000000 #                    0%
^CAborted by signal Interrupt...
Max peak (96 samples): 0x00000000 #                    0%

Reproduction Rate
100%

Expected behavior
It can record audio

Impact
It can record nothing

Environment
platform: BYT MinnowBoard with I2S RT5682
Firmware: fe321d6 https://github.com/thesofproject/sof/commits/master
Kernel: c265f25 https://github.com/thesofproject/linux/commits/topic/sof-dev
Topology: file: tools/topology/sof-byt-rt5682.tplg same as firmware

dmesg.log
logger.log

[plbossart]

@dengyangchao have you used the relevant mixer settings, seems to me that your configuration is incomplete on the codec side?
@bardliao can you try to reproduce?

[bardliao]

@Liviali155 @plbossart I believe that is a mixer setting issue. @Liviali155 Could you try
rt5682.txt first?

[ClarexZhou]

Close. Error not seen after change to below amixer setting:
numid=14,iface=MIXER,name='Stereo1 ADC L1 Mux'
; type=ENUMERATED,access=rw------,values=1,items=2
; Item #0 'DAC MIX'
; Item #1 'ADC'
: values=1